Características

In the hydraulic system, the check valve makes the hydraulic oil to move in one direction only at a preset opening pressure without reversing. Characterized by low pressure loss, it is of cone valve design, and two types are available, i.e. tubular type and plate type. The check valve is mainly installed at the outlet of the pump as a back pressure valve and bypass valve and widely used in hydraulic transmission systems of various sectors.

Parâmetros técnicos

--Diâmetro: 6 ~ 30mm
--Pressão máxima de trabalho: 31.5 MPa
--Fluxo máximo: 10~260 l/min
--Conexão: conexão rosqueada (métrica, unidade imperial)
--Tipo de conexão: tipo tubular, tipo de placa, tipo plug-in
--Temperatura média: -30~+80°C